Serving the Las Vegas Valley
Mon–Fri 8 AM–7 PM · Sat–Sun 8 AM–4 PM
Built-in dishwashers · standard and Gallery
We repair Frigidaire built-in dishwashers that won't drain, leave dishes dirty, leak, won't dry, or won't start — at your home in Las Vegas, Henderson and Boulder City, with the repair price approved by you first.
$75 service call, applied toward the approved repair
Last reviewed
| Symptom | Most common causes |
|---|---|
| Water left in the bottom | Clogged filter, drain hose, garbage disposal knockout plug (new installs), air gap, failed drain pump |
| Dishes not getting clean | Dirty filter, clogged spray arms, low water fill, failed wash motor, hard-water film |
| Not drying | Rinse aid empty, heating element, vent, plastic items (they don't dry well) |
| Leaking | Door gasket, overfilling, too much or wrong detergent, a loose hose connection, cracked tub or pump seal |
| Won't start | Door latch, control lock, power, control board |
| Stops mid-cycle | Float switch or leak sensor tripped, inlet valve, control |
| Won't fill | Supply valve under the sink, inlet valve, float switch |
Start with the safe checks:
If those are clear and water still stays behind, the drain pump is next. Glass fragments and fruit pits are what we usually find jammed in it.
Las Vegas hard water is a big factor. Mineral scale clogs spray-arm jets, leaves a white film on glasses and makes detergent less effective. Use rinse aid, a quality detergent, and clean the filter regularly. If the spray arms aren't turning or the dishwasher hums without a strong wash sound, the circulation pump or wash motor may be failing.
Small puddles at the front left or right corner usually point to the door gasket, overfilling or suds from the wrong detergent. Water under the dishwasher that isn't visible at the door often comes from a hose connection, the inlet valve or the pump. Many Frigidaire dishwashers have a float or leak sensor that stops the cycle when it detects water in the base.
| Repair | Typical range | Notes |
|---|---|---|
| Drain pump | $180–$280 | |
| Water inlet valve | $180–$280 | |
| Door latch / door switch | $180–$280 | |
| Float switch / leak sensor | $180–$280 | |
| Heating element | $180–$330 | |
| Control board | $200–$660 | |
| Circulation pump / wash motor | $250–$550 |
Estimates for typical repairs, not quotes. Your exact price is given for approval after diagnosis, before work begins. The $75 service call is applied toward an approved repair. How our pricing works.
Typical Repair Example
Frigidaire built-in dishwasher
Approximate total $265
Typical Repair Example
Frigidaire Gallery dishwasher
Approximate total $485
Typical Repair Example
Frigidaire built-in dishwasher
Approximate total $245
Typical repair examples describe common scenarios and representative pricing. They are not individual customer records, and your diagnosis and price may differ.
Need your Frigidaire dishwasher looked at?
$75 service call, applied toward the repair. You get the price before any work starts.
The most common causes are a clogged filter, a kinked drain hose, a blocked air gap or garbage disposal connection, or a drain pump jammed by debris. Clean the filter and check the hose first; if water still remains after a cycle, the pump or drain path needs a technician.
In Las Vegas that's usually hard-water mineral deposits. Use rinse aid, make sure the water entering the dishwasher is hot, and clean the filter. If the film persists, a technician can check fill levels, the heater and the wash system.
Most dishwasher repairs take about an hour at your home. Some repairs require pulling the dishwasher out from under the counter, which adds time.
Pumps, valves, latches and sensors are usually worth repairing. A control board or wash motor on an older, lower-priced dishwasher can be a closer call; we'll give you the price first.
Frigidaire repair · Las Vegas Valley
$75 service call, applied toward the approved repair. Price approved by you before work begins. 90-day labor warranty.